Geotechnical drilling rigs on a truck GVM> 3.5 t
The drilling rig is designed to be mounted on a pick-up truck with a GVM below 3.5 tons. The drilling rig is used to drill vertical holes with a diameter of up to Ø160 mm and a depth of up to 15-35m [depending on the model], used in the study of the geological cross-section of the soil. The machine has its own internal combustion engine powering the entire hydraulic system, which makes it an independent unit. The entire control of the drilling rig components occurs in the hydraulic system. Depending on the model, drilling is performed with augers alone [without piping] or in casing pipes [model equipped with a cutter, winch, pipe clamp and drill travel]. Guarantee period: 12 months. We offer drilling accessories for the drilling rig: augers, drilling heads, caps, drill pipes, bailers, forks [leaves], etc. The SGB-50 geological probe, based on the dynamic method of soil compaction testing, can be mounted as additional equipment to the drilling rig.
Read more
** as an option, it is possible to mount a diesel engine (Yanmar, Kubota) Below is a video showing the work of the WSG drilling rig.
| Parameters / Rig type | WSG- P | WSG- W | WSG- B |
|---|---|---|---|
| Drilling diameter | Up to 130 mm | Up to 160 mm | Up to 160 mm |
| Drilling depth | 15 – 20 m | 20 – 30 m | 25 – 35 m |
| Single-speed rotary head | |||
| Torque* | 1280 Nm | 1460 Nm | 1780 Nm |
| Rotational speed | 0 – 89 rpm | 0 – 89 rpm | 0 – 89 rpm |
| Or two-speed rotary head | |||
| Torque* | – | 1st gear: 1080 Nm; 2nd gear: 2160 Nm | |
| Rotational speed | – | 1st gear: 92 rpm; 2nd gear: 46 rpm | |
| Thrust / Pull-down force | 26 kN | 36 kN | 42 kN |
| Pullback force | 26 kN | 36 kN | 42 kN |
| Internal combustion engine** | Petrol 18 HP | Petrol 23 HP | Petrol 27 HP |
| Equipment | – | – | bailing winch, winch, pipe clamp, rig sliding mechanism |
| SGB-50 probe mounting option | Yes | Yes | Only on vehicles with sufficient payload capacity |
** as an option, it is possible to mount a diesel engine (Yanmar, Kubota) Below is a video showing the work of the WSG drilling rig.
| Parameters / Rig type | WSG- P | WSG- W | WSG- B |
|---|---|---|---|
| Drilling diameter | Up to 130 mm | Up to 160 mm | Up to 160 mm |
| Drilling depth | 15 – 20 m | 20 – 30 m | 25 – 35 m |
| Single-speed rotary head | |||
| Torque* | 1280 Nm | 1460 Nm | 1780 Nm |
| Rotational speed | 0 – 89 rpm | 0 – 89 rpm | 0 – 89 rpm |
| Or two-speed rotary head | |||
| Torque* | – | 1st gear: 1080 Nm; 2nd gear: 2160 Nm | |
| Rotational speed | – | 1st gear: 92 rpm; 2nd gear: 46 rpm | |
| Thrust / Pull-down force | 26 kN | 36 kN | 42 kN |
| Pullback force | 26 kN | 36 kN | 42 kN |
| Internal combustion engine** | Petrol 18 HP | Petrol 23 HP | Petrol 27 HP |
| Equipment | – | – | bailing winch, winch, pipe clamp, rig sliding mechanism |
| SGB-50 probe mounting option | Yes | Yes | Only on vehicles with sufficient payload capacity |
Production:
Majdan Krasieniński 17B
21-025 Niemce
NIP: 9462645865
REGON: 061614861
Monday-Friday: 7.00-15.00